methyl ester extraction of sunflower oil in a twin screw extruder

  • Coriander oil extraction, applications and biologically

    Extruder screw rotation speed (rpm) S SF Feeder screw rotation speed (Hz) TAG Triglycerides TBAI Tetrabutylammonium iodide T C6 Extruder filter temperature (°C) T C7 Extruder outlet temperature (°C) TE Trolox equivalents TLC Thin layer chromatography TMS Tetramethylsilane TMSH Trimethylsulfonium hydroxide TS Twin-screw VO Vegetable oil

    Get Price
  • A twin‐screw extruder for oil extraction: I. Direct

    The oil levels remaining in the cake can be reduced to less than 2% by solvent extraction. However, the crude oil has to be refined as it contains many impurities and approximately 600 ppm phosphorus. A new process, in which sunflower seeds are pressed in a twin‐screw extruder, is examined here. The screw profile was first optimized.

    Get Price
  • Cover Jurnal Teknologi Industri Pertanian

    Volume 18, Nomor 1. Hal. 1 59 Juli 2008MODEL PENGEMBANGAN AGROINDUSTRI COCODIESEL DI DAERAH TERPENCILIrawadi Jamaran .. 1 MODEL I'SWOT BAGI PERUMUSAN STRATEGI PENGEMBANGAN AGROINDUSTRI UNGGULAN WILAYAH

    Get Price
  • (PDF) Extraction of sunflower oil by twin screw extruder

    The objective of this study was to investigate the screw configuration allowing oil extraction from sunflower seeds with a twin-screw extruder. Experiments were conducted using a co-rotating twin

    Get Price
  • Twin-screw extruder for oil processing of sunflower seeds

    The fatty acid methyl esters extraction of sunflower oil using a CLEXTRAL BC 45 co-rotating twin-screw extruder increased oil extraction yield up to 96% and decreased residual oil content in cake meal below 5% under solvent-to-solid ratio of 0.70 (Amalia Kartika et al., 2003). In addition, the solvent-to-solid ratio and the screw configuration

    Get Price
  • Alumni Dissertations and Theses The University Akron

    Experiments and Analysis of Polymerization of Methyl Methacrylate in a Model Twin-Screw Extruder: Chu: Lih-Long: Ph.D. 1995: Flow Analysis of Polymerization in a Model Twin Screw Extruder: Chu: Ming-Hou: M.S. 1990: Deformation Behavior and Dynamic Filler-Rubber Interaction of Poly(ethyl Acrylate) and Filled Compounds: Chun: Hyunaee: Ph.D. 1997

    Get Price
  • US9238728B2 Epoxidized fatty acid alkyl esters as

    In some embodiments, the epoxidized fatty acid alkyl ester is methyl epoxy soyate. It was found that epoxidized fatty acid alkyl esters impart a reduction in tensile modulus in compositions containing PLA. The compositions may be formed into films, such as those used in food packaging. A method that includes extruding a composition comprising

    Get Price
  • Long-chain aliphatic polyesters from plant oils

    High oleic sunflower oil methyl ester (Dakolub MB9001) or technical grade methyl erucate, respectively, was used as a starting material. As shown in Fig. 4, both PE-19.19 and PE-23.23 were successfully extruded by means of a twin-screw mini-extruder to produce films. This is quite remarkable as film breaking during extrusion is a frequently

    Get Price
  • IPB University

    METHYL ESTER EXTRACTION OF RIINFI,OWER OIL IN A WIN SCREW EX'I'RUDER Fax: t62 251 621 974 E-mail addr~: ikntW&ythoo Sunflnw~r iril 14'- cxrructsd .fi,onr whole sunflower seeds using ntel&/ ester 05 he sobent. Experirnen~s were conducred in a co-rotating in-screw rtxrruder Th& oil extracliutl yield was memured as junction of screw

    Get Price
  • Vegetable Oil Refineries Vegetable Oil Refinery Plant

    Exporter of Vegetable Oil Refineries Vegetable Oil Refinery Plant, Continuous Refining Plant, Chemical Refining Plants for Vegetable Oils and Physical Refining Plant offered by Sritech Lipid Process Technologies Pvt Ltd., Hyderabad, Telangana.

    Get Price
  • Development of Biobased Composite Materials for Structural

    Twin screw extrusion North Dakota State University Development of Biobased Produced epoxy canola oil resin and epoxy canola methyl ester with up to 5.0% and 5.8% oxirane content, respectively. Twin-screw extruder for compounding thermoplastic polymers in the Materials Processing Lab,

    Get Price
  • Energy analysis in oilseed processing industry Teka

    JAOCS, vol. 76,9, 1081-1086. Evangelista R. L, Cermak S C. 2007.: Full-press oil extraction of Cuphea (PSR23) seeds. J.Am. Oil Chem.Soc, 84,1169-1175. Gudeijan M, Elez-Martmez P, Knorr D. 2007.: Application of pulsed electric fields at oil yield and content of functional food ingredients at the production of rapeseed oil.

    Get Price
  • METHYL ESTER EXTRACTION OF SUNFLOWER OIL IN A TWIN

    oil. Keywords : twin-screw extruder, sunflower oil, methyl ester and extraction INTRODUCTION In the food industry, twin-screw extruder is principally used in the production of various pro-ducts such as snacks, cereals and pet food. Today, the application of twin-screw extruder has been

    Get Price
  • (PDF) Oil expression from Jatropha seeds using a screw

    The highest oil recovery of 73.14% was obtained when As the Jatropha oil is usually destined for the preparation of Jatropha seed was conditioned to 9.69% (db) moisture and biodiesel, the chemical properties of the oil play an important cooked at 110 C for 10 min. Oil recovery from the screw

    Get Price
  • US9238728B2 Epoxidized fatty acid alkyl esters as

    In some embodiments, the epoxidized fatty acid alkyl ester is methyl epoxy soyate. It was found that epoxidized fatty acid alkyl esters impart a reduction in tensile modulus in compositions containing PLA. The compositions may be formed into films, such as those used in food packaging. A method that includes extruding a composition comprising

    Get Price
  • Alumni Dissertations and Theses The University Akron

    Experiments and Analysis of Polymerization of Methyl Methacrylate in a Model Twin-Screw Extruder: Chu: Lih-Long: Ph.D. 1995: Flow Analysis of Polymerization in a Model Twin Screw Extruder: Chu: Ming-Hou: M.S. 1990: Deformation Behavior and Dynamic Filler-Rubber Interaction of Poly(ethyl Acrylate) and Filled Compounds: Chun: Hyunaee: Ph.D. 1997

    Get Price
  • Vol. 18 No. 1 (2008): Jurnal Teknologi Industri Pertanian

    methyl ester extraction of sunflower oil in a twin screw extruder ika amalia kartika pdf model pengembangan agroindustri cocodiesel di daerah terpencil irawadi jamaran tin pdf pengaruh penambahan polioksietilen-(20)-sorbitan monolaurat pada karakteristik bioplastik poli-hidroksialkanoat (pha) yang dihasilkan ralstonia eutropha pada substrat

    Get Price
  • Soybeans Processing for Biodiesel Production

    assisted oil extraction are the major processes pr acticed for oil extraction from soybeans. Mechanical Extraction Mechanical pressing of oil seeds is one of th e most common methods of oil extraction in the world. However, single screw mechanical presses leave about 8 14% of the available oil in the oil seeds (Singh & Bargale, 2000).

    Get Price
  • Pierre-yves Pontalier Institut National Polytechnique de

    Fractionation of sunflower whole plant is carried out with water in a twin-screw extruder. An extract and a raffinate are produced in a single step. Oil extraction yield is 55%. Lipids are extracted in the form of two oil-in-water emulsions: the higher hydrophobic phase and the lower one. Solvent Extraction, Sunflower, Fatty Acid Methyl

    Get Price
  • Biodiesel production from jatropha seeds: Solvent

    The residual oil and fatty acid methyl ester contents in the cake meal were high (more than 11%, A twin-screw extruder for oil extraction: I. Direct expression of oleic sunflower seeds. J Am Oil Chem Soc, 76 Extraction of oleic sunflower oil by twin-screw extruder: Screw configuration and operating conditions effects.

    Get Price
  • Twin-screw extrusion technology for vegetable oil

    Kartika (2008) evaluated the use of linoleic methyl esters for the extraction of sunflower oil in a co-rotating twin-screw extruder. A good process performance was obtained, as the methyl esters showed high oil extraction capacity and the application of a relatively low L/S ratio of 0.65 led to a high oil recovery of 91% and further to a good L

    Get Price
  • A twin-screw extruder for oil extraction: I. Direct

    The oil levels remaining in the cake can be reduced to less than 2% by solvent extraction. However, the crude oil has to be refined as it contains many impurities and approximately 600 ppm phosphorus. A new process, in which sunflower seeds are pressed in a twin-screw extruder, is examined here. The screw profile was first optimized.

    Get Price
  • Evaluation of antifungal activity of free fatty acids

    2.2.3. Column separation of methyl ester fraction . The methyl esters of extract (1.12 g) was purified by column chromatography 1150 mm long and 35 mm in diameter, filled with 250 g of silica gel S, subsequently eluted with a mixture of petroleum ether-chloroform (9:1).

    Get Price
  • Applicability of Subcritical Water Treatment on Oil Seeds

    Evon PH, Kartika IA, Cenry M, Rigal L (2013) Extraction of oil from jatropha seeds using twin-screw extruder: feasibility study. Ind Crop Prod 47:33–42 CrossRef Google Scholar 9.

    Get Price
  • Development of Biobased Composite Materials for Structural

    Twin screw extrusion North Dakota State University Development of Biobased Produced epoxy canola oil resin and epoxy canola methyl ester with up to 5.0% and 5.8% oxirane content, respectively. Twin-screw extruder for compounding thermoplastic polymers in the Materials Processing Lab,

    Get Price
  • Nouveau procédé de fractionnement des graines de tournesol

    The oil expression and extraction were conducted using a co-rotating twin-screw extruder (Model BC 45, Clextral-France). Twenty one screw profiles were examined to define the best performance (oil yield, oil quality and energy input) by studying the influence of operating conditions on temperature pressing, screw rotation speed and seed input

    Get Price
  • WO2012102952A1 Epoxidized fatty acid alkyl esters as

    WO2012102952A1 PCT/US2012/021976 US2012021976W WO2012102952A1 WO 2012102952 A1 WO2012102952 A1 WO 2012102952A1 US 2012021976 W US2012021976 W US 2012021976W WO 2012102952 A1 WO2012102952 A1 WO 2012102952A1 Authority WO WIPO (PCT) Prior art keywords composition oil epoxidized fatty acid alkyl ester Prior art date 2011-01-24 Application number

    Get Price
  • Extraction of sunflower oil by twin screw extruder: Screw

    Furthermore, an investigation of continuous oil extraction using an extruder divided into two zones, (i) twin-screw zone, which was built from two co-rotating and co-penetrating screws and (ii) double single-screw zone, which was constructed from two co-rotating single-screws, increased oil yield up to 90% with residual oil content in cake meal

    Get Price
  • MODEL PENGEMBANGAN AGROINDUSTRI COCODIESEL DI

    METHYL ESTER EXTRACTION OF SUNFLOWER OIL IN A TWIN SCREW EXTRUDER untuk proses pembuatan bioplastik, ekstraksi methyl ester minyak biji bunga matahari dalam twin screw extruder dan potensi penurunan emisi gas rumah kaca melalui pengomposan sampah.

    Get Price
  • Vegetable Oil Refineries Vegetable Oil Refinery Plant

    Exporter of Vegetable Oil Refineries Vegetable Oil Refinery Plant, Continuous Refining Plant, Chemical Refining Plants for Vegetable Oils and Physical Refining Plant offered by Sritech Lipid Process Technologies Pvt Ltd., Hyderabad, Telangana.

    Get Price
  • Long-chain aliphatic polyesters from plant oils

    High oleic sunflower oil methyl ester (Dakolub MB9001) or technical grade methyl erucate, respectively, was used as a starting material. As shown in Fig. 4, both PE-19.19 and PE-23.23 were successfully extruded by means of a twin-screw mini-extruder to produce films. This is quite remarkable as film breaking during extrusion is a frequently

    Get Price
  • Vol. 18 No. 1 (2008): Jurnal Teknologi Industri Pertanian

    methyl ester extraction of sunflower oil in a twin screw extruder ika amalia kartika pdf model pengembangan agroindustri cocodiesel di daerah terpencil irawadi jamaran tin pdf pengaruh penambahan polioksietilen-(20)-sorbitan monolaurat pada karakteristik bioplastik poli-hidroksialkanoat (pha) yang dihasilkan ralstonia eutropha pada substrat

    Get Price
  • 9 NSSI 1II1Blp1cinSJ1 J(l]

    METHYL ESTER EXTRACTION OF SUNFLOWER OIL IN A TWIN SCREW EXTRUDER : untuk proses pembuatan bioplastik, ekstraksi methyl ester minyak biji bunga matahari dalam . twill . screw extruder dan potensi penurumm cmisi gas rumah kaca melalui pengomposan sampah.

    Get Price
  • Overview on economics and technology development of rubber

    Aug 21, 2013· Twin-screw extruder for oil processing of sunflower seeds: thermo-mechanical pressing and solvent extraction in a single step Amalia Kartika, I; Pontalier, PY; Rigal, L Non-edible vegetable oils: a critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production

    Get Price
  • Energy analysis in oilseed processing industry Teka

    JAOCS, vol. 76,9, 1081-1086. Evangelista R. L, Cermak S C. 2007.: Full-press oil extraction of Cuphea (PSR23) seeds. J.Am. Oil Chem.Soc, 84,1169-1175. Gudeijan M, Elez-Martmez P, Knorr D. 2007.: Application of pulsed electric fields at oil yield and content of functional food ingredients at the production of rapeseed oil.

    Get Price
  • CN101912028A Method for producing dephenolized

    The invention discloses a method for producing dephenolized cottonseed protein, which solves the problems of complex process, difficult solvent recovery, high equipment investment and high operating cost of the traditional production technology of the dephenolized cottonseed protein. The method comprises the following steps of: controlling the residue oil ratio of cold-pressed cottonseed cakes

    Get Price
  • assembling jatropha oil screw press

    Evon et al. reported that a twin-screw extruder results in highest oil yield 70.6% with good press cake quality over mechanical screw press. According to this study the optimum operating conditions for this specific twin-screw extruder were 153 rpm screw rotation speed 5.16 kg h −1 inlet flow rate of Jatropha seeds 80 C pressing

    Get Price
  • Development of cutting fluid from transesterified coconut

    An oil-in-water emulsion of coconut oil methyl ester with additives was found to be stable at HLB 15.8 by adding Tween 80 and 20 surfactants. Coconut oil methyl ester along with additives and surfactants enhanced friction, wear, and thermal properties of the oil by 15.12%, 30.66%, and 14.4% respectively when compared to the commercial sample.

    Get Price
  • Xylose removal from lignocellulosic biomass via a twin

    I. Amalia KartikaMethyl ester extraction of sunflower oil in a twin screw extruder. J. Tek. Ind. Pert, 18 (1) (2008), pp. 47-52. View Record in Scopus Google Scholar. I. Amalia Kartika, P.Y. Pontalier, L. RigalTwin-screw extruder for oil processing of sunflower seeds: thermo-mechanical pressing and solvent extraction in a single step.

    Get Price
  • CN101376868A Google

    Download PDF Info Publication number CN101376868A. CN101376868A CNA2008101573575A CN200810157357A CN101376868A CN 101376868 A CN101376868 A CN 101376868A CN A2008101573575 A CNA2008101573575 A CN A2008101573575A CN 200810157357 A CN200810157357 A CN 200810157357A CN 101376868 A CN101376868 A CN 101376868A Authority CN China Prior art keywords fish ethyl ester fish oil

    Get Price
  • Methyl ester extraction of sunflower oil in a twin screw

    Kartika (2008) evaluated the use of linoleic methyl esters for the extraction of sunflower oil in a co-rotating twin-screw extruder. A good process performance was obtained, as the methyl esters

    Get Price
  • (PDF) Oil expression from Jatropha seeds using a screw

    The highest oil recovery of 73.14% was obtained when As the Jatropha oil is usually destined for the preparation of Jatropha seed was conditioned to 9.69% (db) moisture and biodiesel, the chemical properties of the oil play an important cooked at 110 C for 10 min. Oil recovery from the screw

    Get Price
  • Applicability of Subcritical Water Treatment on Oil Seeds

    Evon PH, Kartika IA, Cenry M, Rigal L (2013) Extraction of oil from jatropha seeds using twin-screw extruder: feasibility study. Ind Crop Prod 47:33–42 CrossRef Google Scholar 9.

    Get Price
  • 118373 Vol 2.qxp 8/16/04 10:10 AM Page 805 TWIN-SCREW

    on oil processing of sunflower seeds by a twin-screw extruder positively affected the oil extraction yield and the specific mechanical energy (SME). The injection of methyl ester in module 5 improved the oil recovery and decreased the SME (Figure 2). More oil

    Get Price
  • PEER-REVIEWED ARTICLE bioresources

    WF was added to blend for 5 min. After that, the mixture was introduced into a twin-screw extruder MiniLab II (HAKKE, Thermo Scientific; USA). Screw speed was maintained at 100 rpm and the temperature was 165 °C. The extrudates were cooled in air and granulated into particles. The un-plasticized composites (WPVC) were prepared as reference.

    Get Price
  • Effect of Extruding Full-Fat Soy Flakes on Trans Fat Content

    To evaluate the effects of extrusion process on the trans fatty acids (TFAs) formation in soybean crude oils, three different extrusion parameters, namely, extrusion temperature (80–160°C), feed moisture (10–26%), and screw speed (100–500 rpm), were carried out. It was found that only five different types of TFAs were detected out using gas chromatography-mass spectrometry.

    Get Price
  • Alumni Dissertations and Theses The University Akron

    Experiments and Analysis of Polymerization of Methyl Methacrylate in a Model Twin-Screw Extruder: Chu: Lih-Long: Ph.D. 1995: Flow Analysis of Polymerization in a Model Twin Screw Extruder: Chu: Ming-Hou: M.S. 1990: Deformation Behavior and Dynamic Filler-Rubber Interaction of Poly(ethyl Acrylate) and Filled Compounds: Chun: Hyunaee: Ph.D. 1997

    Get Price
  • 9 NSSI 1II1Blp1cinSJ1 J(l]

    METHYL ESTER EXTRACTION OF SUNFLOWER OIL IN A TWIN SCREW EXTRUDER : untuk proses pembuatan bioplastik, ekstraksi methyl ester minyak biji bunga matahari dalam . twill . screw extruder dan potensi penurumm cmisi gas rumah kaca melalui pengomposan sampah.

    Get Price
  • Twin-screw extruder for oil processing of sunflower seeds

    A new application of twin-screw extruder as a machine to conduct a thermo-mechanical pressing and a solvent extraction of sunflower oil in a single step and in a continuous mode was studied. Experiments were conducted using a CLEXTRAL BC 45 co-rotating twin-screw extruder and whole sunflower seeds with fatty acid methyl esters as a solvent.

    Get Price
  • Film Extrusion of Crambe abyssinica/Wheat Gluten Blends

    Perform the film extrusion in a twin-screw extruder. Set zones 1-10 (each 80 mm-long) along the extruder barrel at a low temperature profile (subsequently called "low-T profile"), as follows: 75-75-75-80-80-80-80-85-85-85 °C. This prevents the wheat gluten from crosslinking in the barrel. Use a flat sheet die (45 mm x 0.7 mm) to extrude the films.

    Get Price
Pre:oil extraction techniques are best for small-scale oil production
Next:cooking and olive oil filtration machine vegetable oil from Belgium